« Forrige

Neste »

Diesel Passenger Boarding Stairs

Beskrivelse:
The diesel Passenger Boarding Stairs control system consists of a height display instrument, a control circuit and an electrical control relay Diesel Passenger Boarding Stairs height display instrument The height gauge adopts a single-chip microcomputer as the core. It samples through the proximity switch on the guide column and sends the signal to the display instrument host for calculation, showing the instantaneous value of the ladder movement (i.e., the actual height of the ladder). Due to the adoption of advanced computing technology and high-quality sampling devices, the display is highly accurate and the response is fast and sensitive. At the same time, due to the adoption of non-contact induction switches, the components are not prone to damage. In addition, all the main units are equipped with computer memory chips, and the measurement data can be stored for a long time. The height gauge is also equipped with a microcomputer reset button, which can be used for reference calibration. In case of interference or other reasons causing display errors, you can lower the ladder to the lowest height and press the reset button to calibrate it. Diesel Passenger Boarding Stairs activity platform control circuit There are two sets each for operating the telescopic platform and the fine-tuning switch. A set is installed on the cab operation control panel and is available for the driver to operate. Another set is located at the front end of the right guard plate of the platform, for on-site operation by staff and intuitive connection to the aircraft Diesel Passenger Boarding Stairs ladder body lifting lock position control circuit When the boarding ladder rises to a certain height, the guide column teeth are locked by the lock block to make a rigid connection. When the height needs to be reduced, operate the electrical switch controller to automatically complete signal recognition, open the lock block, and the ladder body descends Diesel Passenger Boarding Stairs safety anti-collision protection system Proximity switches and a 300mm distance measurement alarm photoelectric system are installed at the left and right ends of the buffer rubber hose at the front end of the platform. Once approaching an aircraft or an obstacle, it can automatically alarm and automatically cut off the platform extension and retraction control circuit to prevent the platform from colliding with the aircraft. Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China Tel: +86 21 50496068 / +86 21 50496058 / +86 400 9980 919 Mobile: +86 137 -6133 -5725 (As WeChat) +86-134 -7248 -8657 +86-195 -1651 -9903 +86-137 -7424 -8052 +86-137 -7129 -7873 E_ mail: joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com
Generelle detaljer:
Selges av:	ohusuhodinozojo (10 / # 1) Vurder ohusuhodinozojo
E-post:	yctianyi@aliyun.com
Annonsedetaljer
Annonseid:	740196
Treff:	42
Utløper:	2026.02.19 (om 120 dager)
Lagt til:	2025.10.22
Karakter	(etter 0 stemmer) Vurder