<?xml version="1.0" encoding="iso-8859-1"?> <rss version="2.0">
<channel>
<title>FreeAds24</title>
<link>https://www.freeads24.eu</link>
<description>https://www.freeads24.eu site syndication</description>
<language>eng</language>
<lastBuildDate>Thu, 4 Jun 2026 10:44:33 EST</lastBuildDate>
<image>
<title>freeads24.eu</title>
<url>https://www.freeads24.eu/layout_images/freeads24_rss.jpg</url>
<link>https://www.freeads24.eu</link>
<description>Free classified ads</description>
<width>166</width>
<height>75</height>
</image>

  
<item> 
	<title>Cars : Get Holistic Overhauling With Accident Repairs in Adelaide</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761418 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Wed, 27 May 2026 18:42:37 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761418</guid> 
</item> 		
  
<item> 
	<title>Cars : What does Catering truck security interlock mean</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761397 ]]></link> 
	<description><![CDATA[ What does the &quot;safety interlock&quot; of the catering truck refer to

&amp;#9312; When the power transfer device is in operation, the transmission gearshift cannot be engaged and the vehicle cannot move.

&amp;#9313; The support legs cannot be retracted properly and the vehicle cannot move.

&amp;#9314; There is an audible and visual alarm device during the lifting of the compartment.

&amp;#9315; The compartment cannot be retracted when it is not lowered to the correct position.

&amp;#9316; The compartment cannot rise or fall when the telescopic platform is not retracted to the correct position.

&amp;#9317; A sound alarm signal is provided when reversing.

&amp;#9318; The compartment lifting and support leg retraction buttons cannot be operated independently. There is a&amp;#32852;&amp;#21160;button that must be operated simultaneously to take effect.

&amp;#9319; When the height exceeds 2.5 meters&amp;#65292; the compartment cannot be raised when the support legs are not placed in the correct position.

&amp;#9320; A proximity switch is installed inside the rubber cylinder of the front platform&amp;#65292; with an&amp;#24863;&amp;#24212;distance of 100mm.

&amp;#9321; The compartment lifting device and the compartment lowering device are interlocked for control from inside and outside the compartment. The priority level of compartment operation is higher than that of ground operation.

&amp;#9322; One limit switch is installed on each side of the rubber cylinder of the front platform&amp;#65292; at an upward angle of 45 degrees. When the compartment is touched by an object&amp;#65292; the compartment cannot rise.

&amp;#9323; The side guardrail must be lowered before the compartment can be lowered.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com ]]></description> 
	<pubDate>Wed, 27 May 2026 10:33:19 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761397</guid> 
</item> 		
  
<item> 
	<title>Cars : aviation passenger boarding ladder produced by Tianyi GSE</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761395 ]]></link> 
	<description><![CDATA[ The aviation passenger boarding ladder produced by Tianyi GSE has a working height ranging from 2400mm to 5800mm. It is suitable for use on aircraft models such as A300, A310, A320, A330, A340, B737, B747, B757, B767, and B777.

The hydraulic system of the aircraft passenger boarding ladder

The hydraulic system of the aircraft passenger boarding ladder is composed of an oil tank, an oil filter, a stop valve, an oil pump, a hand pump, a one-way valve, an electromagnetic directional valve, a bidirectional hydraulic control valve, a lifting cylinder, a fine-tuning cylinder, front and rear support foot cylinders, platform extension and retraction cylinders, and unlocking cylinders, as well as pressure gauges, oil pipes, and pipeline accessories.

The oil pump is a medium-high pressure gear pump, driven directly by the output shaft of the power take-off device, and supplies pressure oil to the hydraulic system. On the inlet and outlet oil paths of the lifting cylinder and support foot cylinder, bidirectional hydraulic control valves are installed, which can lock the piston rods of the cylinders at any position.

This vehicle is equipped with an electric emergency pump. When the entire vehicle is powered, the electric emergency pump can be used to complete all hydraulic actions, such as emergency retraction of the platform, lowering of the ladder body, and retraction of the support feet, etc.

When the engine or oil pump fails, and the manual pump is used for emergency retraction of the support feet, open the emergency valve and manually operate the hand pump. It is prohibited to use it normally and is in a closed state during emergencies.

Except for the fine-tuning cylinder and the unlocking small cylinder, which are single-piston rod single-acting hydraulic cylinders, the rest are single-piston rod double-acting hydraulic cylinders. The upper end of the unlocking cylinder is equipped with a spring, and when it resets, it relies on the spring&#039;s elasticity to reset.

The rated pressure of the hydraulic system is 10 Mpa. The pressure gauge installed on the oil pipe can directly reflect and observe the rated pressure of the hydraulic system. It has been calibrated before leaving the factory, and generally, it is not allowed to adjust randomly during use.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com ]]></description> 
	<pubDate>Wed, 27 May 2026 10:22:47 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761395</guid> 
</item> 		
  
<item> 
	<title>Cars : Audi Auto Body Shop Chappaqua NY for Luxury Car Repairs</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761351 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Tue, 26 May 2026 12:18:20 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761351</guid> 
</item> 		
  
<item> 
	<title>Cars : Airport Apron Bus Passenger Cabin</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761338 ]]></link> 
	<description><![CDATA[ Airport Apron Bus Passenger Cabin

1) The passenger cabin is a large-capacity compartment with a flat floor. The entire passenger cabin is 2.42 meters high, which increases the standing space for passengers in the cabin. The passenger cabin has 14 seats and a rated passenger capacity of 112 people (4 people per square meter standing).

2) To facilitate passengers&#039; quick and safe boarding and alighting, 3 extra-wide pneumatic doors each side of the passenger cabin are provided to allow two passengers to pass through smoothly at the same time.

3) Special facilities for the convenience of disabled people to get on and off the wheelchair are provided on both sides of the front door of the cabin, and 2 fixed wheelchair areas and devices for wheelchair passengers to hold onto are set in the cabin. Wheelchairs are not allowed to obstruct normal passengers when not in use.

4) All the doors in the passenger area are operated and controlled by the driver. The opening and closing settings are on the driver&#039;s console. The control buttons can be set as 2 main control + 6 sub-control switches. When the door is not closed, a light or sound signal will be sent to the driver to ensure passenger safety with a new technical measure.

5) The pneumatic pipes (tubes) used for the passenger doors are made of a well-known brand, Hebei Yadan Nylon Pipe. There are no more than 10 joints in the middle of the pipe to ensure stable air pressure and no leakage.

6) The electromagnetic valves and door pumps used in the passenger door system are of well-known brands, with stable and reliable performance.

7) The passenger door system is equipped with emergency opening switches and operation markings inside and outside the cabin.

8) The passenger door system is equipped with manual rotation and latch safety locks. In adverse conditions (such as strong winds or typhoons), it locks the passenger cabin to prevent it from being eroded by the external environment.

9) Pneumatic passenger doors (aluminum alloy frame)

a) Automatic anti-collision function, which can quickly react and open when a passenger is caught and prevented from being injured. In driving, a unique design of automatic door opening protection function is equipped to ensure the safety of passengers during driving.

b) Vehicle start protection function, when the passenger door is not fully closed, the vehicle cannot start.

c) Passenger door self-locking function, when the vehicle speed exceeds 3 km/h, the vehicle speed signal and the passenger door linkage signal take effect to enter the self-lock state.

d) Passenger door forced release function, when the passenger door malfunctions and cannot be opened normally, the forced release switch can be pressed on the driver&#039;s console.

10) The shuttle bus has a safety interlock device: when the passenger door is opened or not fully closed, when the gearshift is changed from neutral (N) to drive (D) or reverse (R), the control system will not perform the gearshift action. At this time, the gearshift should be changed to neutral, the door should be closed properly, and then the vehicle can be driven. If the passenger door fails and needs to be sent for repair while the door is open (the vehicle cannot carry passengers), press the red &quot;Interlock Release&quot; button on the console, then the interlock is released. After the fault is repaired, the &quot;Interlock Release&quot; button should be reset to restore the interlock, greatly improving operational safety.

11) The side window glass of the vehicle body is a unit-type bonded tempered safety glass with a thickness of 5mm. Each side has 2 sliding windows. It serves as a ventilation and cooling device in the early stage of using air conditioning in summer, with high utilization rate.

12) The wheel package of the passenger cabin adopts an assembled decorative wheel package and is equipped with 14 plastic seats.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com

 ]]></description> 
	<pubDate>Tue, 26 May 2026 10:44:26 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761338</guid> 
</item> 		
  
<item> 
	<title>Cars : What is the function of the airport follow-me vehicle</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761337 ]]></link> 
	<description><![CDATA[ 1. Preventing route errors and avoiding ground conflicts

The layout of taxiways and parking positions at airports is complex, especially at large airports where the routes are dense. The guiding vehicle can precisely lead the aircraft to the designated position, avoiding taking the wrong route, entering non-operational areas by mistake, and preventing ground accidents such as collisions.

2. Providing visual references and adapting to complex scenarios

In low visibility conditions (such as heavy fog or rain), the guiding vehicle&#039;s distinctive yellow paint and roof warning lights have strong visibility, providing clear visual guidance to the pilot; for flight crews landing at unfamiliar airports for the first time, it can directly reduce the occupation of public communication resources and improve operational efficiency.

3. Improving parking accuracy and ensuring operational efficiency

The professional guiding vehicle driver will precisely direct the aircraft to adjust its direction and parking position through standardized communication and driving actions. The final parking error can be controlled within 1 meter, significantly improving the accuracy of parking on the apron and turnover efficiency.

4. Incorporating into the standard system and supporting overall scheduling

The airport follow-me vehicle is a key component of the civil airport ground activity guidance and control system (SMGCS), which can smoothly connect the information transmission between controllers and flight crews, ensuring that the airport can operate orderly under different visibility and traffic conditions.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com

 ]]></description> 
	<pubDate>Tue, 26 May 2026 10:28:51 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761337</guid> 
</item> 		
  
<item> 
	<title>Cars :  ASU (Air Start Unit) compatible</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761293 ]]></link> 
	<description><![CDATA[ ASU (Air Start Unit) is applicable to Boeing 707, 717, 727, 737 series, 757, 767, 747 series, some B777, DC8, DC9, DC10, MD80 series, MD90, MD11, Airbus A320 series, A340 series, A300, A310, A330, that is, all models except those equipped with GE90 engines.

ASU (Air Start Unit) Product Standards

The TYAS290 aircraft ASU (Air Start Unit) complies with the following standards requirements:

&gt;&gt; IATA AHM976 Function Specifications for Aircraft Air Supply Vehicles

&gt;&gt; IATA AHM905 Reference Materials for Civil Aircraft Ground Support Equipment

&gt;&gt; IATA AHM910 Basic Requirements for Aircraft Ground Support Equipment

&gt;&gt; IATA AHM913 Basic Safety Requirements for Aircraft Ground Support Equipment

&gt;&gt; IATA AHM916 Basic Requirements for Towing Interfaces of Apron Equipment

&gt;&gt; ISO2026: 1974 Aircraft Engine Start Air Supply Interface

&gt;&gt; SAE RP 4087 Position and Type Standards for Aircraft Ground Service Interfaces

&gt;&gt; Q/TYT 001-2018 Enterprise Standards for Aircraft Start Air Supply Vehicles

ASU (Air Start Unit) Operating Conditions

&gt;&gt; Altitude shall not exceed 4000 m;

&gt;&gt; Ambient temperature: -40 &amp;#8451; to +50 &amp;#8451;;

&gt;&gt; Air relative humidity: &amp;#8804; 95%.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com ]]></description> 
	<pubDate>Mon, 25 May 2026 10:32:06 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761293</guid> 
</item> 		
  
<item> 
	<title>Cars : Ground Power Units Operation Introduction</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761292 ]]></link> 
	<description><![CDATA[ 1. Pre-operation Checks
Check if the engine fuel, oil, and coolant are sufficient;
Check the insulation of the Ground Power Units output cable plug, the reliability of the output cable terminals, and whether the polarity of the power supply is connected normally;
Check if the battery voltage is sufficient and if the terminals are secure;
Check if all parameters on the display are showing normally.

2. Unit Startup
Set the main power switch to the ON position;
Click the unit control button, the engine motor starts running, the engine starts and enters idle operation mode, at this time the engine speed is approximately 800 rpm (if the engine startup is unsuccessful, wait for 1 minute before making a second startup, if it fails more than three times in a row, look for the cause);
After the engine starts, observe if the oil pressure indicates normally, if not, stop the machine for inspection immediately;
According to the type of power supply to be used, adjust the unit power generation mode on the display to the corresponding mode;
After preheating the unit for a period of time, press the unit control button again, the unit will switch to the rated speed operation mode, at this time the engine speed is approximately 1846 rpm.

3. AC Power Supply Operation
In the AC power generation mode, observe if the unit&#039;s AC power generation is normal;
Insert the AC output cable into the external power socket of the aircraft and ensure that the plug and socket are tightly connected;
According to the used output cable, press the corresponding AC output button, the power supply indicator light of the corresponding button lights up, and the Ground Power Units start to supply power externally;
After the power supply is completed, press the corresponding AC output button again to stop the external power supply, the power supply indicator light of the corresponding button goes out;
Store the AC output cable and cover the plug protection cover.

4. DC Power Supply Operation
In the DC power generation mode, observe if the unit&#039;s DC power generation is normal;
Insert the DC output cable into the external power socket of the aircraft and ensure that the plug and socket are tightly connected;
Press the DC output button, the power supply indicator light of the corresponding button lights up, and the power vehicle starts to supply power externally;
After the power supply is completed, press the corresponding DC output button again to stop the external power supply, the power supply indicator light of the corresponding button goes out;
Store the DC output cable and cover the plug protection cover.

5. Engine Shutdown
After the power supply operation is completed, click the engine control button, the engine will be in a low-speed cooling operation state, after the cooling is completed, set the main power switch to the OFF position, the engine stops, and after a delay, the main power is automatically turned off.

6. Emergency Operation
When an emergency occurs, press the emergency shutdown switch, the unit can stop external power supply and stop operation. After the fault is resolved, rotate the button back to reset and reopen the main power of the power vehicle, and the engine can be restarted again.

7. Adding Fuel, Oil and Coolant
7.1 Adding Fuel
The chassis and upper part of the Ground Power Units share a fuel tank, during use, closely monitor the changes in the fuel level gauge in the driver&#039;s cabin;
The fuel tank is located on the right side of the power vehicle, remove the fuel tank cover, add the corresponding grade of diesel according to the ambient temperature;
After fueling, cover the fuel tank cover.

7.2 Adding Oil
Regularly check the engine oil quantity, before checking, the engine should be in a cold state;
Remove the oil dipstick, check that the engine oil level is between the maximum and minimum marks of the oil dipstick;
When the oil level is below the minimum mark line, add the required amount of oil through the oil filling port on the side of the engine.

7.3 Adding Coolant
Regularly check the engine coolant level, observe the coolant level through the top observation window of the radiator, when observing that the coolant level is low, add the required coolant through the coolant filling port on the top of the vehicle. Do not remove the coolant filler cap while the engine is running or before it has cooled down. It is prohibited to add pure water to the cooling system.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com ]]></description> 
	<pubDate>Mon, 25 May 2026 10:18:36 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761292</guid> 
</item> 		
  
<item> 
	<title>Cars : Enjoy Fully Customized Crash Repairs in Highbury</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761274 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Sun, 24 May 2026 03:12:04 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761274</guid> 
</item> 		
  
<item> 
	<title>Cars :  What are the safety operating rules for the 450T Aircraft Pushback tractor</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761222 ]]></link> 
	<description><![CDATA[ 450T Aircraft Pushback tractor operation safety guidelines:

&amp;#12299;Before starting the vehicle, ensure that all devices of the tractor are in 100% suitable operation and safe condition.

&amp;#12299;If there is an unexpected mechanical failure, immediately shut down the equipment, wait for a qualified mechanical maintenance worker to resolve the fault before reusing it.

&amp;#12299;If unshielded electrical components or electrical faults are detected, immediately press the emergency stop switch and turn off the key switch. Wait for a qualified electrical maintenance worker to resolve the fault before reusing it.

&amp;#12299;To ensure the safety of fault diagnosis and maintenance work, this equipment must be repaired or maintained by qualified mechanical maintenance workers or electrical maintenance workers.

&amp;#12299;Make warning signs for all faulty equipment, remove the ignition key. It is recommended to set up a system for identifying faulty vehicles.

&amp;#12299;Before leaving the driver&#039;s seat, implement parking braking, remove the ignition key. Park the equipment in a clean, flat, and safe parking area on the road.

&amp;#12299;Do not operate the equipment without supervision when the engine is running!

&amp;#12299;The health condition of the operator must be good. They can operate the equipment only when their reaction is fully controlled, their mental and physical state is good. Fatigue, drinking alcohol, applying ointments, and taking medicine will seriously affect or even cause the operator to lose reaction ability.

&amp;#12299;When the equipment is put into use, it must be free of any faults and in good condition.

&amp;#12299;Ensure that the engine, gearbox, axle, and hydraulic system are supplied with appropriate coolant, lubricating oil, and other oils. Regularly check for leaks. Do not use unrecommended engine oil, lubricating grease, gear oil, coolant, etc.

&amp;#12299;To ensure the highest safety and long-term reliability, users must follow the maintenance and inspection cycles. Unauthorized modifications will affect the operational safety of the equipment, significantly reduce its service life, and even lose some warranty rights.

&amp;#12299;For safety reasons, all modifications must be approved.

&amp;#12299;This equipment is equipped with warning devices and a safety protection system. When a warning appears on the equipment, be highly vigilant to determine if it can be used normally. If the warning fails, it must be immediately stopped and marked. Do not operate the equipment with any safety issues!

&amp;#12299;Loose clothes are prone to getting caught in moving parts, so when operating or maintaining the equipment, wear appropriate work clothes. If conditions permit, avoid getting close to the running parts. Otherwise, wear protective clothing and be equipped with necessary safety devices.

&amp;#12299;The working area should be free of debris, clean, and dry. Non-workers should stay away from the running vehicles, pay attention to avoiding pedestrians and other operating equipment in the same area, and if necessary, sound the horn or stop.

&amp;#12299;Do not walk or lie down under the lifted load or the equipment.

&amp;#12299;When climbing or entering the equipment, use the ladder and handrails on the vehicle.

&amp;#12299;The driver&#039;s cabin is limited to one driver and one passenger. Do not overbook! Personnel can only sit in the seats inside the vehicle, and no one else is allowed to be loaded in these positions. If there are special needs, please contact to add safety seats.

&amp;#12299;For safety reasons, the vehicle must be cleaned in time, with no dust, lubricants, fuel, or ice on the windscreen, handrails, and ladder steps.

&amp;#12299;Please wipe off the oil splashed on the vehicle body and throw used rags into the trash bin.

&amp;#12299;The equipment must be operated in the designated driver&#039;s cabin position.

&amp;#12299;The load and weight must always remain within the vehicle&#039;s limit. Overloading will cause mechanical damage and personal injury.

&amp;#12299;If the vehicle is used for a long time continuously, wait for the vehicle temperature to drop before turning off the vehicle&#039;s power supply.

&amp;#12299;Operating the equipment in violation of regulations will cause personal injury, shorten the service life, and reduce the warranty coverage. &amp;#12299;When operating in winding roads, near dangerous areas or on unstable road surfaces, the operator must adjust the appropriate driving speed according to different road conditions. Driving must always be carried out with caution.

&amp;#12299;Query and understand the weight limit values to ensure that the road surface can support the weight of the equipment. During driving, attention must be paid to the load-bearing grade of the bridge, soft road surfaces and manholes, etc. The vehicle must be equipped with emergency operation prompts, first aid kits and fire extinguishers.

&amp;#12299;The equipment owner must ensure that only authorized and trained personnel can operate and use the equipment.

&amp;#12299;Pay attention to the identification of electrical devices and strictly abide by them.

&amp;#12299;Must use the original components provided.

&amp;#12299;Strictly prohibit the use of unrecommended engine oil, lubricating grease, gear oil, coolant, etc.

&amp;#12299;When the vehicle is not in use for a long time, turn off the key switch, remove the key, and then turn off the power main switch after 30 seconds.

&amp;#12299;Before maintaining or repairing the vehicle&#039;s electrical system, turn off the key switch after 30 seconds, turn off the power main switch, to prevent electric shock or fire. And wear insulating clothing, gloves and shoes to prevent electric shock.

&amp;#12299;Strictly prohibit pouring lubricants, chemicals, acidic or alkaline substances into trash cans or discharging them into rainwater streams.

&amp;#12299;According to environmental regulations, properly dispose of hazardous materials, contaminated containers and substances.

&amp;#12299;If using the lifting device, do not allow any personnel to pass under the vehicle before verifying that it is reliably supported by mechanical brackets or pillars.

&amp;#12299;After the vehicle is not in use, cool it down before performing maintenance or repair.

&amp;#12299;Before starting any maintenance and repair work, please turn off the engine, remove the key switch, and disconnect the power main switch after 30 seconds, and hang a &quot;Do Not Operate&quot; label at a prominent position of the vehicle.

&amp;#12299;To prevent others from using or operating the vehicle without permission, before leaving, please remove the ignition key and lock the driver&#039;s cabin.

&amp;#12299;Please ensure to regularly check the functions and conditions of all lifting, moving and structural components; regularly tighten all bolts and nuts of the lifting, moving and structural components and perform necessary lubrication for all lifting, moving and structural components.

&amp;#12299;When leaving the driver&#039;s cabin to operate, set the gear to neutral, pull the handbrake, and turn off the engine; when starting the engine, the driver must sit in the driver&#039;s seat to ensure safety.

&amp;#12299;Be careful to avoid moving parts (such as transmission shafts) to prevent injury.

&amp;#12299;Be careful to avoid hot parts (such as cooling water pipes, side doors of the heat dissipation box, etc.) to prevent burns.

&amp;#12299;When using a jack or legs to lift the tractor, strictly prohibit non-workers from standing near the tractor. And must confirm that the jack is set on a flat and hard place.

&amp;#12299;When the engine cannot start and the tractor is being towed, place the shift lever in neutral, turn on the width indicator light, and then proceed with the towing, with the towing speed less than 5 km/h.

&amp;#12299;When entering the inner side of the tires for maintenance, it is necessary to confirm that the engine is off.

&amp;#12299;When performing welding operations, must cut off the vehicle&#039;s power supply, remove the connection plugs of electronic components to avoid damage to the electronic components during welding.

&amp;#12299;Strictly prohibit disassembling, adjusting and repairing engine, axle, air conditioning, electrical junction boxes and other parts without authorization.

&amp;#12299;When conducting pressure checks and adjusting the hydraulic system, please wear safety goggles.

&amp;#12299;Please carefully clean the areas on the skin that have been contacted by hydraulic oil or other harmful liquids to prevent skin infection.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com
 ]]></description> 
	<pubDate>Fri, 22 May 2026 09:08:48 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761222</guid> 
</item> 		
  
<item> 
	<title>Cars : The road to the sea on Tianyi Boarding Stairs - African Airport</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761219 ]]></link> 
	<description><![CDATA[ The WTJ5060JKT passenger boarding ladder for this customer factory inspection is about to depart from Tianyi GSE factory, cross the ocean and arrive in Ethiopia, and join the ground support team at the local airport. This is not the first time this product has gone abroad. Dozens of the same type of boarding ladders have already been deployed and put into use in multiple countries around the world, making it a shining symbol of China&#039;s aviation ground equipment going global.

In the production workshop, the customer representative witnessed the entire production process of the WTJ5060JKT boarding ladder with their own eyes: each piece of steel underwent stress testing, each welding seam was inspected by flaw detection, each power unit underwent 72-hour full-load trial operation, the working height adjustment range was repeatedly calibrated to ensure smooth operation of every gear from the minimum height of 2400mm to the maximum height of 5800mm. In response to the special requirements raised by Ethiopian customers, the R&amp;D team has specially optimized the anti-slip design of the boarding stairs and added night lighting devices to better meet the operational needs of the local airport.

Over the years, Tianyi GSE Factory has always focused on the research and manufacturing of aviation ground equipment. It has developed customized products to meet the differentiated demands of various overseas markets. Not only has it sold high-quality products, but it has also established a global after-sales support network that can quickly respond to customers&#039; maintenance needs. The successful completion of this factory inspection has further strengthened the mutual trust between the customer and Tianyi Factory. In the future, the two parties will also carry out cooperation on more aviation ground equipment projects, promoting more Chinese-made aviation equipment to enter the global market

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com
 ]]></description> 
	<pubDate>Fri, 22 May 2026 08:58:35 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761219</guid> 
</item> 		
  
<item> 
	<title>Cars : Auto Body Shop New York Restoring Vehicles to Pre-Accident Condition</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761213 ]]></link> 
	<description><![CDATA[ Looking for a trusted auto body shop New York drivers can rely on Our experienced team provides professional collision repair, dent removal, frame straightening, and precision paint matching to restore your vehicle to its pre-accident condition. We use advanced repair technology and high-quality materials to ensure lasting results and customer satisfaction. Whether your car has minor scratches or major collision damage, our certified technicians deliver reliable and efficient service for all makes and models. We also assist with insurance claims to make the repair process stress-free. Choose our auto body shop New York for expert craftsmanship, fast turnaround times, and dependable vehicle restoration services you can trust.

https://www.mnautogroupny.com/ 
 ]]></description> 
	<pubDate>Fri, 22 May 2026 08:13:38 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761213</guid> 
</item> 		
  
<item> 
	<title>Cars : MADE-IN-US.COM  Conectando compradores con vendedores estadounidenses</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761177 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Thu, 21 May 2026 10:27:56 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761177</guid> 
</item> 		
  
<item> 
	<title>Cars : B. A. T. Boys</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761144 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Wed, 20 May 2026 10:22:45 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761144</guid> 
</item> 		
  
<item> 
	<title>Cars : What are the operating regulations for electric baggage tractors</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761138 ]]></link> 
	<description><![CDATA[ Safety is the responsibility and obligation of every operator. This safety guideline includes basic safety measures and typical warnings during the operation of the tractor.

1. Safety when getting on and off the tractor

Do not get on or off the tractor while it is moving. Use the safety pedals and handrails during the process of getting on and off the tractor.

2. Can operate only after sitting steadily

Adjust the seat completely before operating.

Before starting, adjust the seat position to facilitate hands and feet operation.

3. Safe starting

Before starting, confirm the following points:

- The gear switch is in the N position.

- There is no one on the tractor, up, down, front, or back.

- Do not step on the accelerator pedal before turning on the power.

4. Do not make sudden braking or sharp turns

Operate smoothly and accurately. Do not make sudden braking or sharp turns.

Making sharp turns may cause the vehicle to tip over.

5. Pay attention to the direction of vehicle movement

Pay attention to the direction of vehicle movement and maintain a good view.

Be careful when reversing.

6. Do not allow others to get on the tractor

Do not allow others to sit on the tractor.

7. Focus on work

Concentrate on work and learn to prevent the occurrence of dangerous situations.

8. Keep head, arms, and legs inside the tractor at all times

Do not extend your hands or arms.

9. Pay attention to passageway entrances and exits and slow down when turning

When working in crowded areas, pay attention to observing the forks, rope entrances and hanging objects. Slow down when passing through crossroads or other sections with poor visibility and honk the horn.

The speed of turning should be limited to one-third of the maximum running speed of the vehicle.

10. Maintain a certain distance from the roadside or platform.

11. When passing over the shipboard or bridgeboard, confirm its correct fixation and sufficient strength to bear the weight of the tractor.

12. Do not make turns on slopes to avoid danger.

13. Check the area to be traveled

Check the road surface, holes, steep slopes, obstacles, sharp turns, and possible situations that may cause loss of control or jolting. Remove garbage, debris, and objects that may puncture tires and cause the goods to lose balance.

Drive slowly on slippery roads and do not drive on the edge of the road. Be extra careful when unavoidable.

Uneven ground will cause vehicle vibration and noise.

In bad weather conditions such as sandstorms, snow, thunderstorms, heavy rain, and typhoons, do not use the tractor. Especially when the wind speed is greater than 10 meters per second, avoid using the tractor outdoors.

14. Correct parking

Park on a flat surface and engage the handbrake.

If you must park on a slope, use wedge-shaped blocks to pad the wheels.

Turn off the key switch, remove the key. Unplug the battery connector.

The parking must be far away from fire sources.

15. Dragging

When the tractor cannot move, drag it to a safe location.

Do not drag tractors with damaged steering systems or braking systems.

16. Label

The labels and signs on the vehicle have warnings and operation instructions. When operating, please follow the requirements of this manual and the labels, signs, and markings on the vehicle. Check the labels, signs, and markings, replace damaged labels, signs, and markings. ]]></description> 
	<pubDate>Wed, 20 May 2026 08:51:49 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761138</guid> 
</item> 		
  
<item> 
	<title>Cars : Cargo loaders airport the driver needs</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761137 ]]></link> 
	<description><![CDATA[ &amp;#9679; Do not use this machine for transporting people.

&amp;#9679; The machine can be driven only when all the elevatable components are at the lowest position.

&amp;#9679; Make sure there are no goods on the bridge platform and the main platform during driving.

&amp;#9679; Before driving, ensure that the frame is at a higher position (the green indicator light is on).

&amp;#9679; Do not leave the operation area without the bridge platform being at the lowest position.

&amp;#9679; Pay special attention to the size and position of the loader during driving.

Width (passageways, parking spaces, etc.)

Height (aircraft wings, aircraft engines, etc.)

&amp;#9679; Only drive on flat and stable ground.

&amp;#9679; Pay attention to the braking distance and vehicle speed.

&amp;#9679; Avoid driving in ruts or potholes.

&amp;#9679; Turn on the lighting when driving at night or in poor visibility weather conditions.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com ]]></description> 
	<pubDate>Wed, 20 May 2026 08:37:43 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761137</guid> 
</item> 		
  
<item> 
	<title>Cars : Why Interchange Data Matters in Automotive eCommerce</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761101 ]]></link> 
	<description><![CDATA[ Interchange cross-reference data helps automotive sellers connect OEM numbers, competitor SKUs, and replacement part numbers within their catalogs. Without proper interchange mapping, many compatible searches may never show your product listings, reducing visibility and potential sales opportunities.

Adding structured interchange data improves product discoverability across marketplaces and helps customers find the correct parts more easily. Better search coverage can lead to higher traffic, improved rankings, and increased revenue for automotive businesses.
 ]]></description> 
	<pubDate>Tue, 19 May 2026 14:04:10 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761101</guid> 
</item> 		
  
<item> 
	<title>Cars : Main components description of the Container dolly</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761075 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Tue, 19 May 2026 09:13:48 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761075</guid> 
</item> 		
  
<item> 
	<title>Cars : What is the core function of Electric Airport Passenger Stairs</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761072 ]]></link> 
	<description><![CDATA[  ]]></description> 
	<pubDate>Tue, 19 May 2026 09:00:21 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761072</guid> 
</item> 		
  
<item> 
	<title>Cars : Airport Garbage Collection Truck Platform for Aircraft Protection</title> 
	<link><![CDATA[ https://www.freeads24.eu/detail.php?id=761070 ]]></link> 
	<description><![CDATA[ Introduction to Aircraft Protection by Airport Garbage Truck Platform

The platform&#039;s rubber cylinder is equipped with German YAFUN sensor. The vehicle stops working when there is an obstacle within 100mm. The vehicle is installed with TY-ASD anti-collision system, reversing radar and monitoring system.

Introduction to the Emergency Electric Pump of the Garbage Collection Truck

When the vehicle&#039;s electrical system is powered on, simultaneously press the emergency electric pump and the support leg retraction button. This will allow the support legs to be retracted in about one minute. At the same time, pressing the emergency electric pump and the platform retraction button will retract the platform. Pressing the emergency electric pump and the body lowering button will lower the body (note: the electric pump should not operate for a long time; operate for 4 minutes and then stop for 20 minutes). After the vehicle has safely evacuated, check to ensure that the ball valve is open and the manual directional valve is in the middle position.

Airport Garbage Collecter Big Data Supervision Platform

The on-board terminal can achieve wireless connection and real-time data exchange with the vehicle operation monitoring management system; it has the function of vehicle positioning, which can send the vehicle&#039;s location, speed, battery working status information (including battery voltage, power, temperature, abnormal conditions, etc.); it can send real-time information and maintenance information of the vehicle&#039;s main technical parameters and maintenance, including the status of the drive motor, vehicle key fault warning information, vehicle maintenance reminders, etc.; it can receive information and instructions sent by the vehicle operation monitoring management system platform, such as speeding, crossing boundaries, maintenance reminders, etc.

Jiangsu Tianyi Aviation Industry Co., Ltd.
Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China
Shanghai  Office:  Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China
Tel:  +86 21 50496068  /  +86 21 50496058  /  +86 400 9980 919
Mobile: +86 137 -6133 -5725 (As  WeChat) 
            +86-134 -7248 -8657
            +86-195 -1651 -9903
            +86-137 -7424 -8052
            +86-137 -7129 -7873
E_  mail:  joinsun@jstianyi.com.cn
              airport.gse@jstianyi.com.cn                   
Website: www.tianyi-gse.com

 ]]></description> 
	<pubDate>Tue, 19 May 2026 08:52:58 EST</pubDate>
	<guid>https://www.freeads24.eu/detail.php?id=761070</guid> 
</item> 		

</channel>
</rss>