« Pré

What are the safety operating rules for the 450T Aircraft Pushback tractor?

Description:
450T Aircraft Pushback tractor operation safety guidelines: 》Before starting the vehicle, ensure that all devices of the tractor are in 100% suitable operation and safe condition. 》If there is an unexpected mechanical failure, immediately shut down the equipment, wait for a qualified mechanical maintenance worker to resolve the fault before reusing it. 》If unshielded electrical components or electrical faults are detected, immediately press the emergency stop switch and turn off the key switch. Wait for a qualified electrical maintenance worker to resolve the fault before reusing it. 》To ensure the safety of fault diagnosis and maintenance work, this equipment must be repaired or maintained by qualified mechanical maintenance workers or electrical maintenance workers. 》Make warning signs for all faulty equipment, remove the ignition key. It is recommended to set up a system for identifying faulty vehicles. 》Before leaving the driver's seat, implement parking braking, remove the ignition key. Park the equipment in a clean, flat, and safe parking area on the road. 》Do not operate the equipment without supervision when the engine is running! 》The health condition of the operator must be good. They can operate the equipment only when their reaction is fully controlled, their mental and physical state is good. Fatigue, drinking alcohol, applying ointments, and taking medicine will seriously affect or even cause the operator to lose reaction ability. 》When the equipment is put into use, it must be free of any faults and in good condition. 》Ensure that the engine, gearbox, axle, and hydraulic system are supplied with appropriate coolant, lubricating oil, and other oils. Regularly check for leaks. Do not use unrecommended engine oil, lubricating grease, gear oil, coolant, etc. 》To ensure the highest safety and long-term reliability, users must follow the maintenance and inspection cycles. Unauthorized modifications will affect the operational safety of the equipment, significantly reduce its service life, and even lose some warranty rights. 》For safety reasons, all modifications must be approved. 》This equipment is equipped with warning devices and a safety protection system. When a warning appears on the equipment, be highly vigilant to determine if it can be used normally. If the warning fails, it must be immediately stopped and marked. Do not operate the equipment with any safety issues! 》Loose clothes are prone to getting caught in moving parts, so when operating or maintaining the equipment, wear appropriate work clothes. If conditions permit, avoid getting close to the running parts. Otherwise, wear protective clothing and be equipped with necessary safety devices. 》The working area should be free of debris, clean, and dry. Non-workers should stay away from the running vehicles, pay attention to avoiding pedestrians and other operating equipment in the same area, and if necessary, sound the horn or stop. 》Do not walk or lie down under the lifted load or the equipment. 》When climbing or entering the equipment, use the ladder and handrails on the vehicle. 》The driver's cabin is limited to one driver and one passenger. Do not overbook! Personnel can only sit in the seats inside the vehicle, and no one else is allowed to be loaded in these positions. If there are special needs, please contact to add safety seats. 》For safety reasons, the vehicle must be cleaned in time, with no dust, lubricants, fuel, or ice on the windscreen, handrails, and ladder steps. 》Please wipe off the oil splashed on the vehicle body and throw used rags into the trash bin. 》The equipment must be operated in the designated driver's cabin position. 》The load and weight must always remain within the vehicle's limit. Overloading will cause mechanical damage and personal injury. 》If the vehicle is used for a long time continuously, wait for the vehicle temperature to drop before turning off the vehicle's power supply. 》Operating the equipment in violation of regulations will cause personal injury, shorten the service life, and reduce the warranty coverage. 》When operating in winding roads, near dangerous areas or on unstable road surfaces, the operator must adjust the appropriate driving speed according to different road conditions. Driving must always be carried out with caution. 》Query and understand the weight limit values to ensure that the road surface can support the weight of the equipment. During driving, attention must be paid to the load-bearing grade of the bridge, soft road surfaces and manholes, etc. The vehicle must be equipped with emergency operation prompts, first aid kits and fire extinguishers. 》The equipment owner must ensure that only authorized and trained personnel can operate and use the equipment. 》Pay attention to the identification of electrical devices and strictly abide by them. 》Must use the original components provided. 》Strictly prohibit the use of unrecommended engine oil, lubricating grease, gear oil, coolant, etc. 》When the vehicle is not in use for a long time, turn off the key switch, remove the key, and then turn off the power main switch after 30 seconds. 》Before maintaining or repairing the vehicle's electrical system, turn off the key switch after 30 seconds, turn off the power main switch, to prevent electric shock or fire. And wear insulating clothing, gloves and shoes to prevent electric shock. 》Strictly prohibit pouring lubricants, chemicals, acidic or alkaline substances into trash cans or discharging them into rainwater streams. 》According to environmental regulations, properly dispose of hazardous materials, contaminated containers and substances. 》If using the lifting device, do not allow any personnel to pass under the vehicle before verifying that it is reliably supported by mechanical brackets or pillars. 》After the vehicle is not in use, cool it down before performing maintenance or repair. 》Before starting any maintenance and repair work, please turn off the engine, remove the key switch, and disconnect the power main switch after 30 seconds, and hang a "Do Not Operate" label at a prominent position of the vehicle. 》To prevent others from using or operating the vehicle without permission, before leaving, please remove the ignition key and lock the driver's cabin. 》Please ensure to regularly check the functions and conditions of all lifting, moving and structural components; regularly tighten all bolts and nuts of the lifting, moving and structural components and perform necessary lubrication for all lifting, moving and structural components. 》When leaving the driver's cabin to operate, set the gear to neutral, pull the handbrake, and turn off the engine; when starting the engine, the driver must sit in the driver's seat to ensure safety. 》Be careful to avoid moving parts (such as transmission shafts) to prevent injury. 》Be careful to avoid hot parts (such as cooling water pipes, side doors of the heat dissipation box, etc.) to prevent burns. 》When using a jack or legs to lift the tractor, strictly prohibit non-workers from standing near the tractor. And must confirm that the jack is set on a flat and hard place. 》When the engine cannot start and the tractor is being towed, place the shift lever in neutral, turn on the width indicator light, and then proceed with the towing, with the towing speed less than 5 km/h. 》When entering the inner side of the tires for maintenance, it is necessary to confirm that the engine is off. 》When performing welding operations, must cut off the vehicle's power supply, remove the connection plugs of electronic components to avoid damage to the electronic components during welding. 》Strictly prohibit disassembling, adjusting and repairing engine, axle, air conditioning, electrical junction boxes and other parts without authorization. 》When conducting pressure checks and adjusting the hydraulic system, please wear safety goggles. 》Please carefully clean the areas on the skin that have been contacted by hydraulic oil or other harmful liquids to prevent skin infection. Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China Tel: +86 21 50496068 / +86 21 50496058 / +86 400 9980 919 Mobile: +86 137 -6133 -5725 (As WeChat) +86-134 -7248 -8657 +86-195 -1651 -9903 +86-137 -7424 -8052 +86-137 -7129 -7873 E_ mail: joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com
Informations générales:
Vendu par:	ohusuhodinozojo (10 / # 1) Rang ohusuhodinozojo
Email:	yctianyi@aliyun.com
Detail de l'annonce
Annonce No:	761222
Annonce consultée:	54
Annonce expirant:	2026.09.19 (dedans 120 Jours)
Date:	2026.05.22
Evaluation actuelle	(Après 0 votes) Rang