« Prev

Next »

Pushbacks-TIANYI GSE

Description:
Pushbacks-TIANYI GSE Power System Startup Procedure and Operation Precautions 1. Turn on the main power switch; 2. The driver is sitting in the driver's seat. 3. Confirm that the gearshift is in neutral and the parking brake has been applied (the parking brake indicator light is on). 4. Drive system startup When operating the vehicle, the key switch needs to be turned. The low-voltage electrical appliances of the entire vehicle are powered on, and the vehicle's instrument panel, various controllers, and battery management system, etc. start to work. If there are no faults detected and the parking brake indicator light is on, the instrument display shows that it is ready to start. Continue to turn the key switch to the STP position for 2 seconds and then release it. The power system will start self-checking and power on. At this point, the transition from the "power off" state to the "drivable" state is completed. At this time, the instrument panel will display a green "READY" indicator light, indicating that the drive system has been successfully started. If "READY" does not appear according to the startup procedure and no faults are shown on the instrument panel, the self-check of the power system has failed. You can turn off the key switch and then execute the above "Drive System startup Procedure" again. When the vehicle shows the "READY" status, it indicates that the vehicle is ready. In this state, after releasing the parking brake, stepping on the foot brake to shift gears, and then releasing the foot brake and using the accelerator pedal, the vehicle can drive normally. 6. When a vehicle is connected to an external circuit (such as a power grid or an external charger), the vehicle cannot move through its own drive system. Once the drive system is automatically or manually shut down, it can only be restarted through the normal start-up procedure to resume driving. 8. During vehicle operation, due to the high temperature of the drive system or power source components, the vehicle automatically reduces power to ensure safety. At the same time, there are corresponding safety prompts in the instrument panel. 9. Display of remaining power of power battery: The remaining power of the power battery can be displayed in real time on the instrument. Through the display, the remaining power of the power battery can be accurately determined. Jiangsu Tianyi Aviation Industry Co., Ltd. Factory: No.2 Hang Kong Road High-tech zone, Jianhu county, Yancheng City, Jiangsu Province, P.R.China Shanghai Office: Room 1103, Building 35, No. 1399 Jiasong Middle Road, Qingpu District, Shanghai, China Tel: +86 21 50496068 / +86 21 50496058 / +86 400 9980 919 Mobile: +86 137 -6133 -5725 (As WeChat) +86-134 -7248 -8657 +86-195 -1651 -9903 +86-137 -7424 -8052 +86-137 -7129 -7873 E_ mail: joinsun@jstianyi.com.cn airport.gse@jstianyi.com.cn Website: www.tianyi-gse.com
General details:
Sold by:	ohusuhodinozojo (10 / # 1) Grade ohusuhodinozojo
Email:	yctianyi@aliyun.com
Ad Details
Ad id:	738646
Ad views:	26
Ad expires:	2026.02.14 (in 120 days)
Added:	2025.10.17
Current rating	(after 0 votes) Grade